Iné produkty

Message: "No internet connection: Norton Core is unable to detect an internet connection..."

This message indicates that Norton Core router cannot connect to the internet.

To fix this problem, select one of the following:

I do not have a static IP

  1. Make sure that the modem that is provided by your ISP is connected properly and powered on.

  2. If you have a modem-router combo, it must be set up in bridge mode to assure that your network is fully protected. See Set up a combined modem and router in bridge mode.

    After you set up the modem-router combo in bridge mode, only its 'Power' and 'DSL' lights should be lit.

  3. Connect your computer directly to the LAN port of your gateway device and check if you can access the internet.

  4. Do one of the following:

    • If you can access internet, press the Reset button at the bottom of the Norton Core router to restart it.

      Wait for one minute and go through the initial setup again to set up your protected network.

    • If you cannot access internet on your computer, contact your ISP.

Ďakujeme vám!

Ďakujeme vám, že používate podporu Norton.

< Späť

Riešenie mi pomohlo pri vyriešení môjho problému.

Áno Nie

Pomôžte nám pri vylepšení tohto riešenia.

Ďakujeme vám za pomoc pri zlepšení používateľskej skúsenosti.

Čo chcete urobiť ako ďalšie?

Vyhľadajte riešenie alebo nás kontaktujte.

DOCID: v120684386_EndUserProfile_en_us
Operačný systém: Android, iOS
Naposledy zmenené: 23.07.2018