Fix issues configuring network printer or other devices after installing Norton

These steps are for the current version of Norton. If you have an older version or if you do not know your product version, go to Norton Update Center.

STEP 1

Add your device to the Device Trust

  1. Start Norton.

  2. Click Settings.

  3. In the Settings window, click Firewall.

  4. In the General Settings tab, under Network Settings, next to Device Trust, click Configure.

  5. Click Add.

  6. In the Add Device window, enter the following information for the device you cannot connect to:

    • Name - enter a name for your network printer or other device for easy identification.

    • IP or Physical Address - enter the IP or MAC (Media Access Control) address for your network printer or other device.

    • Trust Level - Assign Full Trust to the network device that you cannot access from your computer.

  7. Click Add Device.

  8. Click OK and then Close.

    If the issue is not resolved, go to Step 2.

STEP 2

Configure your Network Trust

  1. Start Norton.

  2. Click Settings.

  3. In the Settings window, click Firewall.

  4. In the General Settings tab, under Network Settings, next to Network Trust, click Configure.

  5. In the Network Trust window, under Network Connection, select the Network, and from the Trust Level drop-down, select Full Trust.

  6. Click Apply and then OK.

  7. In the Settings window, click Close.

Thank you!

Thank you for using Norton Support.

< Back

The solution made it easy for me to handle my issue.

Strongly disagree
Strongly agree

This is not my issue.

Was this information helpful?

Yes No

Help us improve this solution.

Choose all that apply:

Help us improve this solution.

Choose all that apply:

Thank you for your feedback.

What would you like to do now?

Browse for solutions, search the Norton Community, or Contact Us.

DOCID: v63987985_EndUserProfile_en_us
Operating System: Windows
Last modified: 03/19/2018