Promotional banner image

Upgrade for Free

Cybercrime is evolving. So is your protection. *Offer for existing members for the remainder of your subscription. Terms apply.

Applicable for: Android,Mac,Windows,iOS

Fix problems with Norton VPN displaying the actual IP address even after changing VPN server location

You may notice that Norton VPN still shows your real public IP address or an IP address that does not match the VPN location you selected. This can happen when your device or network is using only IPv6, while Norton VPN currently works with IPv4. Because of this mismatch, the IP address shown after changing the VPN server location may not reflect the new VPN region correctly. Please disable IPv6 on your device. For more information, read: Disable Internet Protocol Version 6 (IPv6) on your device.

To further troubleshoot this issue, please follow the instructions below,

Refresh the IP manually.

The "Manual IP Refresh" feature is applicable only for Norton VPN on Windows and macOS. You can ignore this step if you are using Norton VPN on other Operating Systems or Norton 360.

Manual IP Refresh

The Manual IP refresh feature in Norton VPN allows you to refresh your IP address while maintaining your chosen virtual location.

To manually refresh the IP, depending on the operating system, choose one of the following:

Windows and macOS

Depending on your product, choose one of the following:

Norton VPN

  1. Open and connect to the VPN.

    1. Open Norton VPN
    2. Choose your preferred VPN location.
    3. Click Connect and wait until the status shows Connected.

  2. Find the Manual IP Refresh button.

    1. While connected, look next to the Disconnect button.
    2. Click the refresh icon (circular arrow).

  3. Confirm Kill Switch (if prompted).

    1. If you see a prompt to turn on Kill Switch, click "Go To Settings" to enable it, then go back to main screen and click the "Manual IP refresh" icon again.
    2. If you do not want to try the Manual IP Refresh, click “Go Back”.
    3. If you wish to refresh the IP without enabling the Kill Switch, click “Continue to refresh IP”.

  4. Get your new IP and retry.

    1. Wait for the short “Obtaining new IP…” message to finish.
    2. Once connected again, your IP address is refreshed (same location, new IP).
    3. The IP address should match the selected region.

Note:

  • The refresh icon only appears when the VPN is connected and not paused.

Norton 360

  1. Open and connect to the VPN.

    1. Open Norton 360
    2. Click Privacy at the left pane.
    3. Click Open on the Secure VPN tile.
    4. Choose your preferred VPN location.
    5. Click Connect and wait until the status shows Connected.

  2. Find the Manual IP Refresh button.

    1. While connected, look below to the connected region.
    2. Click the button Refresh IP.

  3. Confirm Kill Switch (if prompted).

    1. If you see a prompt to turn on Kill Switch, click "Go To Settings" to enable it, then go back to main screen and click the "Manual IP refresh" icon again.
    2. If you do not want to try the Manual IP Refresh, click “Go Back”.
    3. If you wish to refresh the IP without enabling the Kill Switch, click “Continue to refresh IP”.

  4. Get your new IP and retry.

    1. Wait for the short “Obtaining new IP…” message to finish.
    2. Once connected again, your IP address is refreshed (same location, new IP).
    3. The IP address should match the selected region.

Note:

  • The IP refresh icon only appears when the VPN is connected and not paused.

If the issue persists, connect to a different VPN region.

Connect to a different VPN region

To manually change the geographic region, depending on the operating system, choose one of the following:

Some Advanced VPN features, including additional regions, city-level region selection, Double VPN, and IP Rotation, are currently available on Norton VPN for Windows, macOS, Android, and iOS, and Norton 360 on macOS only. Support for Norton 360 on Windows and mobile platforms will be included in a later rollout.

Windows

Depending on your product, choose one of the following:

Norton VPN

  1. Open Norton VPN on your desktop.

  2. On the Norton dashboard,

    • Click the down arrow next to the current region (above the Connect button).

    • A list of available countries/regions will appear. From this list, select a different Country or City to connect.

Norton VPN also allows you to choose specific cities within a country to connect to. To choose a specific city, in the Change VPN location screen, click the drop-down list present next to the country.
You may also use the search box to search and find a country or city to connect.

Norton 360

  1. Open Norton 360.

  2. On the Norton dashboard, click Privacy on the left side of the window.

  3. In the Privacy window, under Secure VPN, click Open.

  4. In the Secure VPN window, under the Connection tab, click Change Location.

  5. In the Change VPN location window, a list of available countries will appear. From this list, select a different country to connect.

You may also use the search box to search and find a country to connect.

Mac

Depending on your product, choose one of the following:

Norton VPN

  1. Open Norton VPN on your Mac.

  2. On the Norton dashboard,

    • Click the down arrow next to the current region (above the Connect button).

    • A list of available countries/regions will appear. From this list, select a different country or city to connect.

Norton VPN also allows you to choose specific cities within a country to connect to. To choose a specific city, in the Change VPN location screen, click the drop-down list present next to the country.
You may also use the search box to find a country or city to connect.

Norton 360

  1. Open Norton 360.

  2. On the Norton dashboard, click Privacy on the left side of the window.

  3. In the Privacy window, under Secure VPN, click Open.

  4. In the Secure VPN window, under the Connection tab, click Change.

  5. In the Change VPN location window, a list of available countries/regions will appear. From this list, select a different country or city to connect.

Norton 360 on Mac also allows you to choose specific cities within a country to connect to. To choose a specific city, in the Change VPN location screen, click the drop-down list present next to the country.
You may also use the search box to find a country or city to connect.

Android

Depending on your product, choose one of the following:

Norton VPN

This applies to Norton VPN Standard, Norton VPN Plus, and Norton VPN Ultimate users.

  1. Launch Norton VPN.

  2. Tap VPN (first tile) at the bottom, then tap the down arrow next to the current region (below the Connect button).

  3. On the Change VPN Location screen, select a different country or city from the list.

Norton VPN also allows you to choose specific cities within a country to connect to. To choose a specific city, in the Change VPN Location screen, tap the three-dots located next to the country.
You may also use the search box at the top to search and find a country or city to connect.

Norton 360

  1. Launch Norton 360.

  2. At the bottom of the main screen, tap Menu, then tap VPN.

  3. Tap the down arrow next to the current region (below the Connect button).

  4. On the Change VPN Location screen, select a different country from the list.

iOS

Depending on your product, choose one of the following:

Norton VPN

This applies to Norton VPN Standard, Norton VPN Plus, and Norton VPN Ultimate users.

  1. Launch Norton VPN.

  2. Tap VPN (first tile) at the bottom, then tap the down arrow next to the current region (below the Connect button).

  3. On the Change VPN Location screen, select a different region from the list.

Norton VPN also allows you to choose specific cities within a country to connect to. To choose a specific city, in the Change VPN Location screen, tap the three-dots located next to the country.
You may also use the search box to find a country or city to connect.

Norton 360

  1. Launch Norton 360.

  2. On the Norton VPN screen, tap the drop-down list next to Fastest location.

  3. Tap the down arrow next to the current region (below the Connect button).

  4. On the Change VPN Location screen, select a different country from the list.

If the issue persists, change the VPN protocol.

Change VPN protocol settings

The Norton VPN Protocol setting is available in Norton VPN on Windows, macOS, Android, and iOS, and in Norton 360 for Android and macOS. If you are using Norton 360 for Windows or iOS, skip this step, as this setting is not currently available in those apps.

To change the VPN protocol, depending on the operating system, choose one of the following:

Windows

Depending on your product, choose one of the following:

Norton VPN

  • Open Norton VPN on your desktop.

  • Click Settings in the left pane.

  • On the right side, under the VPN Preferences tab, scroll down to the VPN Protocol Settings section, and choose one of the following.

    • Automatic (recommended)

    • WireGuard

    • Mimic

    • OpenVPN (UDP)

    • OpenVPN (TCP)

Norton 360

The VPN Protocol Setting is currently unavailable in Norton 360 for Windows.

Mac

Depending on your product, choose one of the following:

Norton VPN

  • Open Norton VPN on your Mac.

  • Click Settings in the left pane.

  • On the right side, under the VPN Preferences tab, scroll down to the VPN Protocol Settings section, and choose one of the following.

    • Automatic (recommended)

    • IPSec

    • WireGuard

    • Mimic

Norton 360

  • Open Norton VPN on your Mac.

  • Click Privacy in the left pane.

  • Click Open under the Secure VPN.

  • Click the Settings tab, scroll down to the VPN Protocol Settings section, and choose one of the following.

    • Automatic (recommended)

    • IPSec

    • WireGuard

    • Mimic

Android

Depending on your product, choose one of the following:

Norton VPN

  • Open Norton VPN.

  • Tap the VPN (first tile) at the bottom.

  • Tap the Settings (Gear icon) at the top-right side.

  • On the VPN Preferences screen, scroll down and tap the VPN Protocol Settings section, and choose one of the following.

    • Automatic (recommended)

    • WireGuard

    • Mimic

    • OpenVPN (UDP)

    • OpenVPN (TCP)

Norton 360

  • Open Norton 360.

  • Tap the Menu (second tile) at the bottom.

  • From the Menu screen, under the Privacy section, tap VPN.

  • Tap the Settings (Gear icon) at the top-right side.

  • On this screen, scroll down and tap the VPN Protocol Settings section, and choose one of the following.

    • Automatic (recommended)

    • WireGuard

    • Mimic

    • OpenVPN

iOS

Depending on your product, choose one of the following:

Norton VPN

  • Open Norton VPN.

  • Tap the VPN (first tile) at the bottom.

  • Tap the Settings (Gear icon) at the top-right side.

  • On the VPN Preferences screen, scroll down and tap the VPN Protocol Settings section, and choose one of the following.

    • IPSec

    • WireGuard

    • Mimic

Norton 360

The VPN Protocol Setting is currently unavailable in Norton 360 for iOS.

If you are still having issue, you can share your feedback via our Feedback option in the VPN product. You can also contact us by visiting Member Services and Support.

DocID: v133522079
Last modified: 06/04/2026

Was this article helpful?

Keep your online identity private!

Browse like no one’s watching with Norton anti-tracking software.

Need more help?

Download
Manage my account
Buy & renew
Contact us
Community
Support scams
Norton rescue tools
Think you have virus?
Problem launching on Windows